Free civil and construction tools
Building & Carpentry Calculators
Enter measurements to estimate areas, quantities and basic geometry. Choose a tool below; results show the equation and units. Works on a phone or computer, with no sign-in.
Area & perimeter
Concrete volume
Treat the selected item as a rectangular prism. Add waste for irregular edges only if appropriate.
Excavation volume
This is in-situ geometric volume. Loose spoil expands after excavation; check ground conditions and disposal needs.
Blockwork estimate
Estimate only: excludes bond pattern, cut blocks, piers, lintels and breakage beyond your allowance.
Studs & joists
Count assumes one member at each end of a straight run. It does not size the timber or determine safe spacing.
Lumber volume / board feet
Uses nominal dimensions as entered. Actual dressed timber size may be smaller; verify supplier sizes and local conventions.
Roof rafter geometry
For a simple symmetrical gable, run is half the building span plus horizontal overhang. Add roofing details separately.
Stair geometry
A layout aid only. Building codes set maximum riser height, minimum tread depth, landings, headroom, handrails and uniformity.
Slope & fall
Use horizontal run and a decimal percentage. Confirm drainage direction and minimum/maximum slope for the application.
Tile quantity
Does not plan cuts or account for layout, pattern, breakage risk or boxes sold by the supplier.
Paint estimate
Use the coverage rate on the actual paint label. Surface texture, colour change and application method affect use.
Unit converter
Convert common SI, metric and imperial units used in building and civil work.
Common building and civil formulas
Search the equation, topic, symbol or unit. This is a core reference, not an exhaustive design standard.
The calculators are free for public educational use. The CARR interface, explanations, selection and arrangement of topics, and software are original work © 2026 CARR. No third-party text, code, diagrams, or images are included. The equations are standard engineering relationships, written and presented in original wording; using them does not make a design code-compliant.